#How to prepare an e-Catalog from www.ZyTemp.com:
save this page (or other page) as *.mht (recommended, because you get one single file) or
save this page (or other page) as *.htm (not recommended, because you will get many files)

Notes:
Storage temperature -20 ~ +65°C/ 95%RH, non condensing for one month.

#AC: 2°C ,+/-2% means +/-2°C or 2% of reading or whichever is greater.
when Tamb=25°C, Emissivity=0.95

#ACm: below -33°C, the accuracy is +/-4°C

#WIG: "Whichever Is Greater"

#ACF: Accuracy for Food Grade
#ACF: -33~ 0°C: +/-(1°C +1% of reading) 00~ 65°C : +/-1°C 65°C~100°C +/-1.5%
#ACF: -27~32°F: +/-(2°F +1% of reading) 32~150°F : +/-2°F 150°F~212°F +/-1.5%

#ACpb: Thermocouple is test under Tamb=23+/-6°C
#APs: test by a Standard Precision thermocouple probe,
#BL: Test condition: Tamb=25°C , turn on for 1minutes,turn off 10minutes, Backlite & Laser turn off.
#BW: Battery low warning means ~1/4 Battery Life remained,VbatLow~2.70Volt
Battery empty warning means Battery is excessively low. device will shutdown., VbatEmpty~2.55Volt

#Battery life (TN2 Laser) 3.6~6.1hr

TN3:
Battery life(TN3 Laser) ~360hr with Backlite, without Laser,

Battery Shelf Life (CR2032) > 2 year
Battery low warning means ~1/4 Battery Life remained

#ES HBM:=Human Body Mode

#PRI : see below, Chapter Pricing

#RE: Resolution outside -9.9~199.9°C = 1°C, outside -9.9~199.9°F = 1°F
#RM:
What is Room Mode :
It's a thermistor sensor inside the thermopile,
which can deliver a very accurate temperature reading (than infrared),
of course, it's slow. typical Thermal Time Constant=10minutes,
Accuracy of Room Mode Typical+/-0.1°C;Max+/-0.2°C at 15~35°C, +/-0.3°C at 0~50°C
#RP: Repeatibility, test condition: Tamb=25°C , Tobj=Tamb+/-5°C, definition:one sigma (one standard deviation) of 16 measurements.
#RP1: Repeatibility, test condition: Tamb=25°C, Tobj=100°C, definition:one sigma (one standard deviation) of 16 measurements.

#RTC:accuracy = 70ppm(3min/month) at 25°C, 92ppm(4min/month) at 0-50°C

#Sh: Sheath Type: we have these different sheath
Penetration Blunt; Air; Liquid , Needle, Penetration
Under Development; Surface

Current Consumption: (without Backlite & Laser, unless otherwise specified)
Iop (When device is on) typ=3.5mA Max=6mA (without Backlite or Laser)
IopOff (When device is off) typ=1uA Max=3uA (without Rear Time Clock)
IopOff (When device is off) typ=10uA Max=15uA (with Rear Time Clock)
Laser typ=33mA, Max 55mA
Backlite of TN3 typ=6mA Max 9mA

General Notes:
Spec and price subject to change without notice.
This data sheet contains information specific to products manufactured at the time of its publication.
Contents herein do not constitute a warranty.
Some models had exclusive dealer in certain territories.
The color on the photos may be different from the real product.